福建晋江市前港湖、龙湖、虺湖等的地震堵塞成因研究     

徐起浩  施建生  聂树明  王莉娅  叶秀薇 《国际地震动态》2004,(Z1):27

在国外前苏联学者尼可拉也夫曾提及地震后有的河流形成地震坝,其后再超覆沉积细粒物质,并称为"地震沉积相",显然这是指的地震堵塞湖形成后的沉积.国内最著名的地震堰塞湖是1933年四川省茂汶北的迭溪7.5级地震,这次强震不仅使迭溪全城及周围60余城镇、村寨全部毁灭,并且四山普遍崩溃,迭溪台地大规模崩塌、堵塞岷江,形成四个地震堵塞湖.大震后45天湖水溃决,造成下游水灾.类似这种地震堵塞湖是地震导致山地,丘陵或台地崩塌堵塞溪流,是地震导致的重力作用堵塞,应为地震重力堰塞湖.本文论及的地震堰塞湖即前港湖、龙湖、虺湖、丙州西侧小湖位于福建省晋江市龙湖镇西南侧,处晋江半岛中部,4个湖沿着控制深沪湾地堑北西边缘的衙口-丙洲断裂呈NE60°线状展布.该断裂与其东侧的深沪-金井断裂共同构成了全新世深沪湾地堑,卫星照片中有清晰的显示.这两条断裂及其所夹的活动地堑同属于区域性的常乐-诏安断裂带中段部份.  相似文献   

中国南方海相含油气保存单元的层次划分与综合评价   总被引：1，自引：0，他引：1  

梁兴  叶舟  马力  吴少华  张廷山  刘家铎  徐克定 《海相油气地质》2004,(Z1)

以最近十年中国南方的海相新区油气勘探评价成果为依托 ,以油气成藏和整体封闭保存体系评价为核心 ,在渝东—湘鄂西、中下扬子和滇黔桂三大区域划分出 9个有利区块 5 1个含油气保存单元 ,并将其归纳为四个层次。综合评价认为 ,方西和石柱保存单元具有较好的整体封存体系 ,属持续性含油气保存单元 ,为首选勘探目标 ;江汉盆地南部、句容—海安区块、南鄱阳坳陷、楚雄盆地东北部具备或基本具备整体封存条件 ,属于沉积重建型含油气保存单元 ,通过精细勘探可望获得商业性油气流 ;楚雄盆地西北部、南盘江坳陷、十万大山盆地和渝东—湘鄂西地区利川复向斜由于晚期强烈构造改造而仅存在部分封存体系 ,需要攻关探索 ;思茅、渝东—湘鄂西地区的花果坪和桑植—石门地区已失去整体封闭保存条件 ,仅局部存在封存体系 ,地质条件高度复杂 ,勘探风险甚高。  相似文献   

发射光谱载体蒸馏法测定地质样品中微量硼铍锡银   总被引：2，自引：2，他引：2  

李滦宁  赵淑杰  王烨 《岩矿测试》2004,23(1):30-32

选择了适合的缓冲剂,利用载体蒸馏法将被测元素与基体元素分离,使Be转变为易挥发的氟化物与B、Sn、Ag同时蒸发;降低了谱线背景及元素检出限;加入内标元素Au、Bi,提高了方法的准确度和精密度;采用普通 3mm×3mm×0.7mm杯型电极,装样量少,操作简单。方法检出限(wB/10-6)分别可达B1.5、Be0.3、Sn0.8、Ag0.02;准确度(Δlog C)基本在-0.05～0.05,精密度(RSD,n=8)为2.9%～17%。  相似文献   

油气圈闭与鄂尔多斯盆地北部铀成矿关系探讨   总被引：11，自引：2，他引：11  

孙晔  李子颖  肖新建  侯高文 《铀矿地质》2004,20(6):337-343

鄂尔多斯盆地北部的伊盟隆起区 ,特别是杭锦旗至东胜一带的地层发育大量的圈闭 ,它们是油气聚集成藏的场所。本文剖析了这些圈闭的类型和成因 ,指出它们是盆地北部天然气运移的有利指向区 ,是还原性气体的储存库和重要的扩散源 ;油气渗出和含氧含铀水渗入的交汇部位是铀成矿的有利场所。因此 ,查明圈闭和断裂构造 ,对分析油气运移方向及砂岩型铀矿预测具有实际意义  相似文献   

电法软件设计中交互与可视化技术应用     

顾观文  武晔 《地质与勘探》2004,40(Z1):243-246

电法软件中的可视化技术包括电法数据交互编辑修改、样点曲线和一维地电模型的可视化和人机交互、断面图等值线与颜色填充、二维地电模型人机交互建模、三维异常体交互建模.这些技术为实现一个实用、快速、操作方便的电法软件系统提供了可靠的保证.  相似文献   

Transformation of garnet epidote amphibolite to eclogite, western Dabie Mountains, China   总被引：8，自引：0，他引：8  

J. Liu  K. Ye 《Journal of Metamorphic Geology》2004,22(5):383-394

Omphacite and garnet coronas around amphibole occur in amphibolites in the Hong'an area, western Dabie Mountains, China. These amphibolites consist of an epidote–amphibolite facies assemblage of amphibole, garnet, albite, clinozoisite, paragonite, ilmenite and quartz, which is incompletely overprinted by an eclogite facies assemblage of garnet, omphacite and rutile. Coronas around amphibole can be divided into three types: an omphacite corona; a garnet–omphacite–rutile corona; and, a garnet–omphacite corona with less rutile. Chemographic analysis for local reaction domains in combination with petrographical observations show that reactions Amp + Ab + Pg = Omp +Czo + Qtz + H₂O, and Amp + Ab = Omp ± Czo + Qtz + H₂O may lead to the development of omphacite coronas. The garnet–omphacite–rutile corona was formed from the reaction Amp + Ab + Czo + Ilm ± Qtz = Omp + Grt + Rt + H₂O. In garnet–omphacite coronas, the garnet corona grew during an early stage of epidote amphibolite facies metamorphism, whereas omphacite probably formed by the reactions forming the omphacite corona during the eclogite facies stage. It is estimated that these reactions occurred at 0.8–1.4 GPa and 480–610 °C using the garnet–clinopyroxene thermometer and omphacite barometer in the presence of albite.  相似文献   

Conditions of pocket formation in the Oktyabrskaya tourmaline-rich gem pegmatite (the Malkhan field, Central Transbaikalia, Russia)     

Igor S. Peretyazhko  Victor Ye. Zagorsky  Sergey Z. Smirnov  Mikhail Y. Mikhailov 《Chemical Geology》2004,210(1-4):91-111

Coexisting melt (MI), fluid-melt (FMI) and fluid (FI) inclusions in quartz from the Oktaybrskaya pegmatite, central Transbaikalia, have been studied and the thermodynamic modeling of PVTX-properties of aqueous orthoboric-acid fluids has been carried out to define the conditions of pocket formation. At room temperature, FMI in early pocket quartz and in quartz from the coarse-grained quartz–oligoclase host pegmatite contain crystalline aggregates and an orthoboric-acid fluid. The portion of FMI in inclusion assemblages decreases and the volume of fluid in inclusions increases from the early to the late growth zones in the pocket quartz. No FMI have been found in the late growth zones. Significant variations of solid/fluid ratios in the neighboring FMI result from heterogeneous entrapment of coexisting melts and fluids by a host mineral. Raman spectroscopy, SEM EDS and EMPA indicate that the crystalline aggregates in FMI are dominated by mica minerals of the boron-rich muscovite–nanpingite CsAl₂[AlSi₃O₁₀](OH,F)₂ series as well as lepidolite. Topaz, quartz, potassium feldspar and several unidentified minerals occur in much lower amounts. Fluid isolations in FMI and FI have similar total salinity (4–8 wt.% NaCl eq.) and H₃BO₃ contents (12–16 wt.%). The melt inclusions in host-pegmatite quartz homogenize at 570–600 °C. The silicate crystalline aggregates in large inclusions in pocket quartz completely melt at 615 °C. However, even after those inclusions were significantly overheated at 650±10 °C and 2.5 kbar during 24 h they remained non-homogeneous and displayed two types: (i) glass+unmelted crystals and (ii) fluid+glass. The FMI glasses contain 1.94–2.73 wt.% F, 2.51 wt.% B₂O₃, 3.64–5.20 wt.% Cs₂O, 0.54 wt.% Li₂O, 0.57 wt.% Ta₂O₅, 0.10 wt.% Nb₂O₅, 0.12 wt.% BeO. The H₂O content of the glass could exceed 12 wt.%. Such compositions suggest that the residual melts of the latest magmatic stage were strongly enriched in H₂O, B, F, Cs and contained elevated concentrations of Li, Be, Ta, and Nb. FMI microthermometry showed that those melts could have crystallized at 615–550 °C.

Crystallization of quartz–feldspar pegmatite matrix leads to the formation of H₂O-, B- and F-enriched residual melts and associated fluids (prototypes of pockets). Fluids of different compositions and residual melts of different liquidus–solidus P–T-conditions would form pockets with various internal fluid pressures. During crystallization, those melts release more aqueous fluids resulting in a further increase of the fluid pressure in pockets. A significant overpressure and a possible pressure gradient between the neighboring pockets would induce fracturing of pockets and “fluid explosions”. The fracturing commonly results in the crushing of pocket walls, formation of new fractures connecting adjacent pockets, heterogenization and mixing of pocket fluids. Such newly formed fluids would interact with a primary pegmatite matrix along the fractures and cause autometasomatic alteration, recrystallization, leaching and formation of “primary–secondary” pockets.  相似文献   

预应力锚索技术在大型水库除险加固工程中的应用          下载免费PDF全文

呼咏  孙志峰  田野 《探矿工程》2004,31(9):46-47,50

介绍了无粘结预应力锚固技术在吉林省二龙山水库除险加固工程中的应用。对造孔、编索、下索、张拉等工艺进行了详细介绍。  相似文献   

基于宽带网的河南省太阳紫外线强度监测系统研究   总被引：2，自引：1，他引：2  

冶林茂  厉玉昇  杨海鹰  陈海波 《气象科技》2005,(Z1)

使用自主研发的Gstar-Ⅱ型太阳紫外线监测仪,建立基于宽带网的河南省城市紫外线强度监测系统。太阳紫外线强度自动监测站将从紫外线传感器获得的气象要素信息传给本地专用计算机,进行数据处理和编码,然后通过互联网把数据信息送到数据业务中心站,数据业务中心站具有对接收数据进行初步处理和进库的功能;各级气象台站可以很方便地通过宽带Internet网WinSock协议进入数据处理中心,按照自己的要求调用全省紫外线强度历史和实时资料,为本地紫外线预报提供有力的科学依据和手段。  相似文献   

A study on the focal parameters of Shidian M =5.9 earthquake sequences in 2001     

Qin Jia-zheng  Qian Xiao-dong  Ye Jian-qing 《地震学报(英文版)》2005,18(3):269-279

On the basis of about 300 earthquake wave forms observed in the Shidian M _S=5.9 sequences on April 12, 2001 recorded in Kunming Digital Seismic Network, the spectra of shear wave have been used to estimate the focal parameters of these earthquake sequences. The results show that within the magnitude range of 1.5–5.3, the seismic moments are 10¹⁰–10¹⁶ N·m, the corner frequencies are 0.2–0.8 Hz, radii of the focal rupture are 200–2 500 m and the stress drops are 0.1×10⁵–20×10⁵Pa. Through the statistical analyses of variation of corner frequency f _c and stress drop Δσ with time, it is discovered that the average corner frequency of the foreshock sequences is obviously lower than that of the aftershock sequences. Contrarily, the average stress drops Δσ of the foreshock sequences are clearly higher than that of the aftershocks. It is considered that these variation characteristics of average corner frequency and stress drops before and after the main shock have index significance to the precursory information before a strong earthquake. The higher stress drops for the foreshock sequences show that the higher shear stresses have been stored in the area of main shock. After the main shock, most of the stresses have been released, so the aftershock sequences show a rupture process of lower stresses. Foundation item: Scientific and Technological Key Project of Yunnan Province (2001NG46)  相似文献